Ask your AI about MCP1663 — and the rest of your design
Connect PartsPlan once to Claude, ChatGPT or another AI, and it reads the manufacturer's original datasheets for every part in your BOM or schematic, not just this one — answering with the document and page number.
e.g. “Using PartsPlan, check the datasheets for my whole BOM, and give the MCP1663 ratings and package dimensions with the pages.”
Free: 300 calls a month · no card required
Key Specs Summary(42)
- Driver Type
- Boost
- Hi Rel
- Yes
- Input Voltage Range Max
- 5.5
- Input Voltage Range Min
- 2.4
- Max Duty Cycle
- 90
- Vout Max
- 32
- Of Outputs
- 1
- Temp Range Max
- 125
- Temp Range Min
- -40
- Output Current
- 375
- Quiescent Current
- 0.25
- Rad Hard
- Yes
- Synchronous Rectifier
- No
- topology
- SEPIC, Flyback
- Vin Max
- 5.5
- Vin Min
- 2.4
- accuracy
- 3
- Adjustable Vout
- yes
- Bypass Mode
- yes
- Control Mode
- Peak Current Mode Control
- dimensions
- 2x3x0.8mm
- dimming
- no
- dithering
- no
- Enable Pin
- yes
- Hyper Light Load
- no
- Iq Shutdown
- 0.3
- Light Load Mode
- no
- Low Noise Anti Ringing Control
- no
- Low Q
- no
- msl
- MSL-1
- Overcurrent Protection
- yes
- Overvoltage Protection
- Yes
- package
- TDFN
- Pin Count
- 8
- Power Good Signal
- no
- Soft Start
- internal
- Solder Composition
- NiPdAu
- Switch Current Limit Max
- 1.8
- Switching Frequency K Hz
- 500
- Thermal Shutdown
- yes
- True Load Disconnect
- OVP
- vfb
- 1.227