MaxLinear
SP510E
We keep the manufacturer's original datasheet (PDF) for this part number. There is no catalog summary for it yet — check values and applicability on the original pages.
From page 1 of the datasheet
JANUARY 2020 REV. 1.0.2
GENERAL DESCRIPTION
FEATURES
Up to 52Mbps Differential Transmission Rates ±15kV HBM ESD Tolerance for Analog I/O Pins Integrated Termination Resistors for V.11/V.35 Eight Drivers and Eight Receivers (8TX/8RX) Adjustable Logic Level Pin VL (Down to 1.65V)
The SP510E is a highly integrated physical layer solution that is configurable to support multiple serial standards. It incorporates eight drivers and eight receivers (8TX/8RX), configurable for either differential (V.11 or V.35) or single ended (V.28 and V.10) signaling.
Software Selectable Protocols with 3-Bit Word:
SP510E enables a Serial Communications Controller to implement a variety of serial port types including V.24, V.25, V.36, EIA-530, EIA-530-A, X.21, RS-232. The device architecture is designed to support the data and clock signals used in HDLC or SDLC serial ports as either DTE or DCE.
Text from page 1 of the manufacturer's original (tables and part-number lists left out). Check values and conditions on the original pages.
Read the published page text →Ask your AI about SP510E — and the rest of your design
Connect PartsPlan once to Claude, ChatGPT or another AI, and it reads the manufacturer's original datasheets for every part in your BOM or schematic, not just this one — answering with the document and page number.
e.g. “Using PartsPlan, check the datasheets for my whole BOM, and give the SP510E ratings and package dimensions with the pages.”
Free: 300 calls a month · no card required