Several parts in one table — with the datasheet page and test condition for each value
Updated 2026-10-13
Choosing candidate parts is your AI's job. PartsPlan finds the same items for those candidates in the manufacturers' original datasheets and attaches the document, page number and test condition to every cell. Values measured under different conditions are not dropped into the same cell, and values the tables do not print are left empty.
Question template
Put [item 1, item 2, item 3] for [part A], [part B] and [part C] into one table from their datasheets.
For every cell, give the document and page number and the value's test condition (voltage, current, temperature).
If the conditions differ, do not merge them into one cell — mark them; if a table does not print a value, leave it empty and say where (which figure page) to look.Real example — three SOT-23 N-channel MOSFETs
On 13 October 2026 we found each part's manufacturer datasheet with PartsPlan and checked every value below on its printed page. The page each value is printed on is in parentheses.
| Item | AO3400A (Alpha & Omega) | 2N7002 (onsemi) | BSS138 (onsemi) |
|---|---|---|---|
| Document revision | Rev 3.1, July 2023 | Rev 2.10, August 2016 | Rev. 7 |
| VDS max | 30 V (p. 1) | 60 V (p. 3) | 50 V (p. 2) |
| ID continuous | 5.7 A, TA=25°C (p. 1) | 115 mA (p. 3) | 0.22 A (p. 2) |
| VGS(th) min · typ · max | 0.65 · 1.05 · 1.45 V, ID=250 µA (p. 2) | 1 · 2.1 · 2.5 V, ID=250 µA (p. 4) | 0.8 · 1.3 · 1.5 V, ID=1 mA (p. 2) |
| RDS(on) typ · max | 19 · 32 mΩ, VGS=4.5 V (p. 2) | no VGS=4.5 V row — 1.7 · 7.5 Ω at VGS=5 V (p. 4) | 1.0 · 6.0 Ω, VGS=4.5 V (p. 2) |
| Qg typ · max | 6 · 7 nC, VGS=4.5 V (p. 2) | not in the electrical characteristics tables — Figure 10 gate-charge curve (p. 7) | 1.7 · 2.4 nC, VGS=10 V (p. 3) |
Values are as printed in each manufacturer's document; we did not judge whether a part suits a design. 2N7002 and BSS138 are made by several companies, so the values in this table are from the onsemi documents.
What to notice in this table
- Different conditions: RDS(on) is the VGS=4.5 V value for AO3400A and BSS138, but the 2N7002 document has no 4.5 V row, so its value is at 5 V. They are not compared directly in one cell.
- Qg is measured at VGS=4.5 V for AO3400A and at 10 V for BSS138, so those numbers are not compared directly either.
- Missing values stay empty: the 2N7002 electrical characteristics tables do not list Qg; it appears only as a curve (Figure 10, p. 7). If you read it from the graph, say so.
- Whose document: when several companies make the same part number, note which company's document each value comes from.
- Document and page in every cell: if a value looks odd, open that page of the original right away.
Who does what
- Your AI: chooses the candidate parts, builds the table and judges whether a part suits the design.
- PartsPlan: finds each part's manufacturer document (checking whose document it is) and hands over the already-prepared table and graph locations with that page's text and original page image.