Skip to content
PartsPlan AIPartsPlan AI
Analog Devices ADP7118ARDZ-3.3
Collected dataLinear Regulators

Analog Devices

ADP7118ARDZ-3.3

linear regulator

No Domestic Stock

Request a quote for this part and sellers will provide prices.

Key Specs Summary(12)

features
Enable control;Over Current Protection;Thermal Shutdown
Number Of OutputsVerified
1
Operating Temperature
-40℃~+125℃@(Tj)
Operating Voltage
20V
Output Configuration
Positive
Output CurrentVerified
200mA
Output Type
Fixed
Output VoltageVerified
3.3V
package
SOIC-8-EP
Package Industry NameEnriched
SOIC
Pin CountEnriched
8
Supply Current Iq
50uA

Datasheet Extracted

Facts extracted directly from the datasheet (sourced)

Pin Configuration · 8-Lead SOIC · 8 pins

#NameTypeFunction
1VOUToutputRegulated Output Voltage. Bypass VOUT to GND with a 2.2 µF or greater capacitor.
2SENSE/ADJinputSense Input (SENSE). Connect to load. An external resistor divider may also set the output voltage higher than the fixed
3GNDpower inGround.
4ENinputThe enable pin controls the operation of the LDO. Drive EN high to turn on the regulator. Drive EN low to turn off the r
5SSinputSoft Start. An external capacitor connected to this pin determines the soft-start time. Leave this pin open for a typica
6VINpower inRegulator Input Supply. Bypass VIN to GND with a 2.2 µF or greater capacitor.
7VINpower inRegulator Input Supply. Bypass VIN to GND with a 2.2 µF or greater capacitor.
8VINpower inRegulator Input Supply. Bypass VIN to GND with a 2.2 µF or greater capacitor.

Absolute Maximum Ratings

VIN to GND-0.3 to +24V
VOUT to GND-0.3 to VINV
EN to GND-0.3 to +24V
SENSE/ADJ to GND-0.3 to +6V
SS to GND-0.3 to VIN or +6Vwhichever is less
Storage Temperature Range-65 to +150°C
Junction Temperature (TJ)150°C

Recommended Operating

Input voltage range2.7 to 20V
Operating Ambient Temperature (TA) Range-40 to +125°C

Thermal

theta ja
52.7
theta jc
41.5

Ratings · Reliability

aec q
AEC-Q100 qualified

Ordering

ARDZ-3.3
8-Lead SOIC_N_EP, 3.3V Output

Similar Parts

Reference Designs Using This Part

0 designs

Manufacturer-validated system circuits with BOM and Gerber files — one step closer to a finished product than the typical circuit in a datasheet.

Global Stock