No Domestic Stock
Request a quote for this part and sellers will provide prices.
Key Specs Summary(12)
- features
- Over Current Protection;Thermal Shutdown;Enable control;Input undervoltage protection
- Number Of OutputsVerified
- 1
- Operating Temperature
- -40℃~+125℃
- Operating Voltage
- 3.6V
- Output Configuration
- Positive
- Output CurrentVerified
- 1.2A
- Output Type
- Fixed
- Output VoltageVerified
- 1.8V
- package
- LFCSP-16-EP(4x4)
- Package Industry NameEnriched
- LFCSP
- Pin CountEnriched
- 16
- Supply Current Iq
- 1.1mA
Datasheet Extracted
Facts extracted directly from the datasheet (sourced)Pin Configuration · 16-Lead LFCSP · 17 pins
| # | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power in | Regulator Input Supply |
| 2 | VIN | power in | Regulator Input Supply |
| 3 | VIN | power in | Regulator Input Supply |
| 4 | EN | input | Enable Input |
| 5 | PG | output | Power Good (open-drain) |
| 6 | GND | power in | Ground |
| 7 | SS | passive | Soft Start |
| 8 | NC | no connect | Not Connected |
| 9 | SENSE | input | Sense output voltage |
| 10 | VOUT | power out | Regulated Output Voltage |
| 11 | VOUT | power out | Regulated Output Voltage |
| 12 | VOUT | power out | Regulated Output Voltage |
| 13 | VOUT | power out | Regulated Output Voltage |
| 14 | VOUT | power out | Regulated Output Voltage |
| 15 | VIN | power in | Regulator Input Supply |
| 16 | VIN | power in | Regulator Input Supply |
| 17 | EPAD | power in | Exposed paddle connected to GND |
Absolute Maximum Ratings
| VIN to GND | -0.3 to 4.0V | |
| VOUT to GND | -0.3 to VINV | |
| EN to GND | -0.3 to VINV | |
| SS to GND | -0.3 to VINV | |
| PG to GND | -0.3 to 4.0V | |
| SENSE/ADJ to GND | -0.3 to VINV | |
| Storage Temperature Range | -65 to 150°C | |
| Junction Temperature Range | -40 to 125°C | |
| Junction Temperature | 150°C |
Recommended Operating
| Input Voltage Range | 1.6 to 3.6V | |
| Shutdown Current | <2µA |
Thermal
- theta ja
- 42
Ordering
- R7
- RoHS Compliant Part
Similar Parts
Reference Designs Using This Part
0 designsManufacturer-validated system circuits with BOM and Gerber files — one step closer to a finished product than the typical circuit in a datasheet.