ADIN1111BCPZ

interface

No Domestic Stock

Request a quote for this part and sellers will provide prices.

Key Specs Summary(7)

Datasheet cross-check1 matched

Data Rate: 10Mbit/s
Ethernet Speed Standards: 10BASE-T1L
features: IEEE1588 timestamp;Cable diagnostics;Power-on reset;Programmable LED indication
Number Of Channels: 1
packageVerified: LFCSP-32(5x5)
type: Ethernet Transceiver
Voltage Supply: 1.8V;2.5V;3.3V

Facts extracted directly from the datasheet (sourced)

#	Name	Type	Function
1	SDI	input	Serial Data Input
2	SDO/SPI_CFG03	output	Serial Data Output / SPI Protocol Configuration Pin 0
3	LED_0	output	Programmable LED Indicator
4	RESET	input	Active Low Input
5	LED_1	output	Programmable LED Indicator
6	CLK25_REF	output	Analog Reference Clock Output
7	XTAL_I/CLK_IN	input	Input for Crystal / Single-Ended 25 MHz Reference Clock Input
8	XTAL_O	output	Crystal Output
9	DNC	no connect
10	DNC	no connect
11	TXN	bidirectional	Transmit/Receive Negative Pin
12	TXP	bidirectional	Transmit/Receive Positive Pin
13	AVDD_H	power in	Analog Supply Voltage
14	DNC	no connect
15	CEXT_2	passive	External Decoupling for LDO Circuit
16	CEXT_3	passive	External Decoupling for LDO Circuit
17	DNC	no connect
18	AVDD_L	power in	Analog Supply Voltage for Internal LDO Circuits
19	DLDO_1P1	power out	Digital Core 1.1 V Power Supply Output Pin
20	INT	output	Interrupt Pin Output (Open-drain)
21	TEST1	input	Test Pin
22	TEST2	no connect
23	CS	input	Active Low Chip Select
24	TS_TIMER/MS_SEL3	output	Time Stamp Timer Output / Leader-Follower Selection
25	TX2P4_EN3	input	Transmit Level Amplitude Hardware Configuration Pin
26	SWPD_EN3	input	Software Power-Down Configuration
27	DNC	no connect
28	VDDIO	power in	Digital Power for SPI
29	SPI_CFG1	input	SPI Protocol Configuration Pin 1
30	SCLK	input	Serial Clock Input
31	LINK_ST	output	Link Status Output
32	TS_CAPT	input	Time Stamp Capture
EP	Exposed Pad	power in	GND Paddle

Source 1 ↗Extraction confidence: High

VDDIO to GND	-0.3 to +4V
DLDO_1P1 to GND	-0.3 to +1.35V
AVDD_H, AVDD_L to GND	-0.3 to +4V
SPI1, INT to GND	-0.3 to VDDIO + 0.3V
TXN, TXP to GND	-0.3 to AVDD + 0.3V
LED_x, RESET, LINK_ST to GND	-0.3 to VDDIO + 0.3V
XTAL_I/CLK_IN to GND	-0.3 to 2.75V
XTAL_O, CLK25_REF to GND	-0.3 to 1.35V
Storage Temperature Range	-65 to +150°C
Junction Temperature (TJ maximum)	125°C

Industrial Temperature Range	-40 to +85°C	TA
Extended Temperature Range	-40 to +105°C	TA