📦이미지 준비중
국내 재고 없음
이 부품에 대한 견적을 요청하시면 판매자들이 가격을 제시합니다.
주요 스펙 요약(7)
데이터시트 대조일치 1
- Data Rate
- 10Mbit/s
- Ethernet Speed Standards
- 10BASE-T1L
- features
- IEEE1588 timestamp;Cable diagnostics;Power-on reset;Programmable LED indication
- Number Of Channels
- 1
- package검증
- LFCSP-32(5x5)
- type
- Ethernet Transceiver
- Voltage Supply
- 1.8V;2.5V;3.3V
데이터시트 추출 정보
데이터시트에서 직접 추출한 사실 (출처 명시)핀 배치 · LFCSP · 33 핀
| # | Name | Type | Function |
|---|---|---|---|
| 1 | SDI | input | Serial Data Input |
| 2 | SDO/SPI_CFG03 | output | Serial Data Output / SPI Protocol Configuration Pin 0 |
| 3 | LED_0 | output | Programmable LED Indicator |
| 4 | RESET | input | Active Low Input |
| 5 | LED_1 | output | Programmable LED Indicator |
| 6 | CLK25_REF | output | Analog Reference Clock Output |
| 7 | XTAL_I/CLK_IN | input | Input for Crystal / Single-Ended 25 MHz Reference Clock Input |
| 8 | XTAL_O | output | Crystal Output |
| 9 | DNC | no connect | |
| 10 | DNC | no connect | |
| 11 | TXN | bidirectional | Transmit/Receive Negative Pin |
| 12 | TXP | bidirectional | Transmit/Receive Positive Pin |
| 13 | AVDD_H | power in | Analog Supply Voltage |
| 14 | DNC | no connect | |
| 15 | CEXT_2 | passive | External Decoupling for LDO Circuit |
| 16 | CEXT_3 | passive | External Decoupling for LDO Circuit |
| 17 | DNC | no connect | |
| 18 | AVDD_L | power in | Analog Supply Voltage for Internal LDO Circuits |
| 19 | DLDO_1P1 | power out | Digital Core 1.1 V Power Supply Output Pin |
| 20 | INT | output | Interrupt Pin Output (Open-drain) |
| 21 | TEST1 | input | Test Pin |
| 22 | TEST2 | no connect | |
| 23 | CS | input | Active Low Chip Select |
| 24 | TS_TIMER/MS_SEL3 | output | Time Stamp Timer Output / Leader-Follower Selection |
| 25 | TX2P4_EN3 | input | Transmit Level Amplitude Hardware Configuration Pin |
| 26 | SWPD_EN3 | input | Software Power-Down Configuration |
| 27 | DNC | no connect | |
| 28 | VDDIO | power in | Digital Power for SPI |
| 29 | SPI_CFG1 | input | SPI Protocol Configuration Pin 1 |
| 30 | SCLK | input | Serial Clock Input |
| 31 | LINK_ST | output | Link Status Output |
| 32 | TS_CAPT | input | Time Stamp Capture |
| EP | Exposed Pad | power in | GND Paddle |
출처 1 ↗추출 신뢰도: 높음
패키지 정보
- jedec
- CP-32-20
- package
- LFCSP
절대 최대 정격
| VDDIO to GND | -0.3 to +4V | |
| DLDO_1P1 to GND | -0.3 to +1.35V | |
| AVDD_H, AVDD_L to GND | -0.3 to +4V | |
| SPI1, INT to GND | -0.3 to VDDIO + 0.3V | |
| TXN, TXP to GND | -0.3 to AVDD + 0.3V | |
| LED_x, RESET, LINK_ST to GND | -0.3 to VDDIO + 0.3V | |
| XTAL_I/CLK_IN to GND | -0.3 to 2.75V | |
| XTAL_O, CLK25_REF to GND | -0.3 to 1.35V | |
| Storage Temperature Range | -65 to +150°C | |
| Junction Temperature (TJ maximum) | 125°C |
권장 동작 조건
| Industrial Temperature Range | -40 to +85°C | TA |
| Extended Temperature Range | -40 to +105°C | TA |
열 특성
- unit
- °C/W
- theta ja
- 44
등급 · 신뢰성
- esd cdm
- 2000V (All Other Pins)
- esd hbm
- 8000V (TXN, TXP)
오더링 코드
- BCPZ
- -40°C to +85°C, 32-Lead LFCSP